ZSL Cold Mine Vibrating Screen-Lipu Heavy Industry

The cold mine vibrating screen of series ZSL used in metallurgy industry, it is also used in the grade work of cold sinter under 150°C temperature. With reference to the condition of location site, the motor could be fixed on the left side or right side. Lipu Industry could design the various cold screen according to the requirements from the clients.
Working Principle:
The cold mine vibrating screen manufacturer of series ZSL adopt vibration exciter with block eccentric shaft, the Double vibrator is driven by two motors and making the active of contrarotation, and to make the screen reciprocating motion of periodicity along straight line, and at last it is to drive the screen to finish the sieving work.
Structural Features:
The cold screen of series ZSL is made up of screen box, vibration exciter, vibration reduction system, transmission and foundation support.
The side plate and beam from the screen box adopt excellent alloy steel, the joint between the main stress plate and side plate and the joint between side plate and beam are riveted by the clinch of circular groove.
The screen plate is made up of heat resisting and high-abrasive material or heat resisting rubber, the characteristic is good resistance to thermal and long life. The worm-easy spare parts are reliable and easy to be fixed, in order to save the time of maintenance.
Adopting the two stage vibration isolation system, and it is on the basis of the low dynamic load.

Views: 86

Reply to This

Forum Categories

© 2021   Created by Vanguard Media Ltd.   Powered by

Badges  |  Report an Issue  |  Terms of Service