Vibrating feeder is also called vibrating feeding machine. The machine in the production process, may get block, granular materials from store in the bunker even, timing,continuously to devices, in the sand production line can feed for the crushing machinery continuous evenly, and for material coarse screening, vibrating feeder is widely used in metallurgy, coal mine, beneficiation, building materials, chemical, grinding  industries such as crushing, screening combination of equipment.

The vibrating feeder`s features :1, Our vibrating feeder is of highest capacity for the same deck size in industry.
2, Sub-resonance tuning to guarantee efficient, continued operation as deck liners wear.
3, simple structure, easy to adjust and to maintain.
4,Infinite variety of sizes and custom configurations, typically up to 600 t/h to suit your requirement.
5,Our vibrating feeder is added closed frame, it can largely reduce pollution and noise.

Maintain and examine the machine frequently to prolong the service life of the machine, which is an important way to assure normal operation.The customers must notice this.

As to the lubrication, the following points should be pay attention to:
1. Oil applied in this machine should be wartery. The lubricating oil should adapt to the local environment and temperature. Usually 20# is adopted.
2. Make sure the level of the oil in the vibrator is higher than the sign. Change the oil every 3-6 months. Clean the oil tank, bearing track and gear surface with gasoline or coal oil before changing.

Views: 114

Reply to This

Replies to This Discussion

What is the target market for this machine?

Well,this link has doesn't work,if you want to know more about production information,welcome to click crushers


Forum Categories

© 2022   Created by Vanguard Media Ltd.   Powered by

Badges  |  Report an Issue  |  Terms of Service